USB-Port - solder to the NAS

From NAS-2000.org

Jump to: navigation, search

Since the NAS-2000 comes with an unsoldered USB-Port why not use it?


Adding an USB-Port to the the NAS is an easy task since the needed holes are already on the Board.

Just search for the U1 label:


Board.png


and add the USB-Port:


Board port.png


solder it and you are done.

Note:
The default kernel does NOT support the USB-Port but the next Tinky release will :-)

This is only a USB1.1 port. As you know the processor has a built-in USB2.0-port also, but because of technical issues inside the chip there is no possibility to use this USB2.0-port together with the LAN-port.

Retrieved from "http://www.nas-2000.org/mwiki/index.php/USB-Port_-_solder_to_the_NAS"
Personal tools